TLCR6800, tlcy6800 www.vishay.com vishay semiconductors rev. 1.1, 29-apr-13 1 document number: 81157 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultrabright led, ? 5 mm untinted non-diffused package description the tlc.68.. series is a clear, non-diffused 5 mm led for high end applications where supreme luminous intensity required. these lamps with clear untinted plastic case utilize the highly developed ultrabright alingap (as). the lens and the viewing angle is optimized to achieve best performance of light ou tput and visibility. product group and package data ? product group: led ?package: 5 mm ? product series: power ? angle of half intensity: 4 features ? untinted non-diffused lens ? utilizing ultrabright allngap (as) ? high luminous intensity ? high operating temperature: t j (chip junction temperature) up to 125 c for allngap devices ? luminous intensity and color categorized for each packing unit ? esd-withstand voltage: up to 2 kv according to jesd22-a114-b ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? interior and exterior lighting ? outdoor led panels ? instrumentation and front panel indicators ? central high mounted stop lights (chmsl) for motor vehicles ? replaces incandescent lamps ? traffic signals ? light guide design note (1) driving the led in reverse direction is suitable for a short term application 19224 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. TLCR6800 red 7500 35 000 - 50 611 616 622 50 - 2.1 2.7 50 allngap on gaas tlcy6800 yellow 5750 25 000 - 50 585 590 597 50 - 2.1 2.7 50 allngap on gaas absolute maximum ratings (t amb = 25 c, unless otherwise specified) ? TLCR6800, tlcy6800 parameter test condition symbol value unit reverse voltage (1) v r 5v dc forward current t amb ? 85 c i f 50 ma surge forward current t p ? 10 s i fsm 1a power dissi pation p v 135 mw junction temperature t j 125 c operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 40 to + 100 c soldering temperature t ? 5 s, 2 mm from body t sd 260 c thermal resistance junction/ambient r thja 300 k/w
TLCR6800, tlcy6800 www.vishay.com vishay semiconductors rev. 1.1, 29-apr-13 2 document number: 81157 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmax. /i vmin. ? 2.0 note (1) in one packing unit i vmax. /i vmin. ? 2.0 ? ? note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. ? the above type numbers repres ent the order groups which include only a few brightness groups. only one group will be shipped on each bag (there will be no mixing of two groups on each bag). ? in order to ensure availability, single brightness groups will not be orderable. ? in a similar manner for colors where wavelength groups are measured and binned, single wave length groups will be shipped in any one bag. ? in order to ensure availability, single wavelength groups will not be orderable. note ? wavelengths are tested at a current pulse duration of 25 ms and an accuracy of 1 nm. optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? TLCR6800, red parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 50 ma TLCR6800 i v 7500 35 000 - mcd dominant wavelength i f = 50 ma ? d 611 616 622 nm peak wavelength i f = 50 ma ? p - 622 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ?? -18-nm angle of half intensity i f = 50 ma ? - 4-deg forward voltage i f = 50 ma v f -2.12.7v reverse voltage i r = 10 a v r 5--v temperature coefficient of v f i f = 50 ma tc vf -- 3.5-mv/k temperature coefficient of ? d i f = 50 ma tc ? d -0.05-nm/k optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? tlcy6800, yellow parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 50 ma tlcy6800 i v 5750 25 000 - mcd dominant wavelength i f = 50 ma ? d 585 590 597 nm peak wavelength i f = 50 ma ? p - 593 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ?? -17-nm angle of half intensity i f = 50 ma ? - 4-deg forward voltage i f = 50 ma v f -2.12.7v reverse voltage i r = 10 a v r 5--v temperature coefficient of v f i f = 50 ma tc vf -- 3.5-mv/k temperature coefficient of ? d i f = 50 ma tc ? d -0.1-nm/k luminous intensity classification group light intensity (mcd) standard min. max. ff 1350 2700 gg 1800 3600 hh 2400 4800 ii 3200 6400 kk 4300 8600 ll 5750 11 500 mm 7500 15 000 nn 10 000 20 000 pp 13 500 27 000 qq 18 000 36 000 rr 24 000 48 000 ss 32 000 64 000 tt 43 000 86 000 uu 57 500 115 000 color classification group dom. wavelength (nm) yellow red min. max. min. max. 0 585 588 1 587 591 611 618 2 589 594 614 622 3 592 597
TLCR6800, tlcy6800 www.vishay.com vishay semiconductors rev. 1.1, 29-apr-13 3 document number: 81157 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - relative intensity vs. wavelength fig. 3 - relative intensity vs. wavelength fig. 4 - forward current vs. forward voltage fig. 5 - relative luminous flux vs. forward current fig. 6 - relative luminous flux vs. forward current 0 10 20 30 40 50 60 0 20406080100120 t amb - ambient temperature (c) 16710 yellow red i f - forward current (ma) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 570 590 610 630 650 670 - wavelength (nm) 16007 i rel. - relative luminous intensity red 0 0.2 0.4 0.6 0.8 1.0 1.2 540 560 580 600 620 640 - wavelength (nm) 16008 i v rel. - relative luminous intensity yellow 0 20 40 60 80 100 1.5 1.7 1.9 2.1 2.3 2.5 v f - forward voltage (v) 15974 i f - forward current (ma) red yellow 0.01 0.1 1 10 1 10 100 i f - forward current (ma) 15978 i v rel - relative luminous intensity red 0.01 0.1 1 10 1 10 100 i f - forward current (ma) 15979 yellow i v rel - relative luminous intensity
TLCR6800, tlcy6800 www.vishay.com vishay semiconductors rev. 1.1, 29-apr-13 4 document number: 81157 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters 20243 area not plane parabolic lens drawing-no.: 6.544-5311.01-4 < 0.7 ? 5 0.15 35.7 0.55 2.54 nom. 0.5 + 0.15 - 0.05 0.6 + 0.2 - 0.1 1 min. 0.5 + 0.15 - 0.05 a 7.7 0.15 ? 5.5 0.15 8.7 0.3 (4.9) c specifications according to din technical drawings issue: 4; 19.05.09
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
